 |
 |
 |
| |
|
|
For the impatients:
" Enable syntax :syntax on " This allows including the proper PLUMED syntax file: :let &runtimepath.=','.$PLUMED_VIMPATH " The former command requires PLUMED_VIMPATH to be set. Alternatively, use this: " let &runtimepath.=',/usr/local/lib/plumed/vim' " properly adjusted to the path where PLUMED is installed. " This makes autocompletion work in the expected way: :set completeopt=longest,menuone " This enables bindings of F2/F3/F4 to plumed specific commands: :let plumed_shortcuts=1
:set ft=plumedThis will also enable autocompletion. Use
<CTRL-X><CTRL-O> to autocomplete a word.:setlocal foldmethod=syntax
:PHelp (or shortcut <F2>) to show in a split window a short help about the action defined in the line where the cursor is. Typing :PHelp again (or pushing <F2>) you will close that window. With <CTRL-W><CTRL-W> you go back and forth between the two windows.#! FIELDS, VIM will automatically understand it is a PLUMED outpt file (VIM filetype = plumedf) and will color fields and data columns with alternating colors. Typing :PPlus and :PMinus (or pushing <F3> and <F4>) you can move a highlighted column.See below for more detailed instructions.
When PLUMED is compiled, directories help and syntax will appear in builddir/vim. They contain a VIM plugin that can be used to highlight proper PLUMED instructions in a PLUMED input file and to quickly retrieve help. There is also a file builddir/vim/scripts.vim that helps VIM in recognizing PLUMED output files.
To make VIM aware of these files, you should copy them to your $HOME/.vim directory. Later you can enable plumed syntax with the command
:set ft=plumed
If you work in an environment where several PLUMED versions are installed (e.g. using env modules), we recommend the following procedure:
.vimrc file the following line: :let &runtimepath.=','.$PLUMED_VIMPATH
The modulefile provided with PLUMED should set the PLUMED_VIMPATH environemnt variable to the proper path. Thus, when working with a given PLUMED module loaded, you should be able to enable to proper syntax by just typing
:set ft=plumed
in VIM. Notice that the variable PLUMED_VIMPATH is also set in the sourceme.sh script in the build directory. Thus, if you modify your .vimrc file as suggested, you will be able to use the correct syntax both when using an installed PLUMED and when running from a just compiled copy. Finally, in case you have both a preinstalled PLUMED and you have your development version the following command would give you the optimal flexibility:
:let &runtimepath.=','.$PLUMED_VIMPATH.',/opt/local/lib/plumed/vim/'
The environment variable PLUMED_VIMPATH, if set, will take the precedence. Otherwise, vim will resort to the hardcoded path. In this case we assumed that there is a PLUMED installed in /opt/local/ (e.g. using MacPorts), but you can override it sourcing a sourceme.sh file in the compilation directory or loading a PLUMED module with module load plumed.
If you are tired of typing :set ft=plumed, you can use a modeline. Add to your .vimrc file the following commands
:set modeline :set modelines=5
Then, at the beginning of your PLUMED input file, put the following comment:
# vim:ft=plumed d: DISTANCE ATOMS=1,2 RESTRAINT ARG=d AT=0.0 KAPPA=1.0
Now, every time you open this file, you will see it highlighted.
The syntax file contains a definition of all possible PLUMED actions and keywords. It is designed to allow for a quick validation of the PLUMED input file before running it. As such, all the meaningful words in the input should be highlighted:
METAD) and labels (such as metad: or LABEL=metad) will be highlighted in the brightest way (Type in VIM). Those are the most important words.ATOMS= or COMPONENTS when part of the action DISTANCE) will be highlighted with a different color (Statement in VIM).ATOMS=) will be highlighted with a different color (String in VIM).Comment in VIM).If you see something that is not highlighted and appears in black, this is likely going to result in an error at runtime. Think of this as a sort of preliminary spell-check. For this checks to be effective, we recommend to use a syntax file generated with exactly the same version of PLUMED that you are using. In case you find that parts of an input file that is valid are not highlighted, then please report it as a bug. On the contrary, you cannot expect the VIM syntax file to recognize all possible errors in a PLUMED input. Thus, a file for which the highlighting looks correct might still contain errors.
Notice that syntax highlighting also allow VIM to properly fold multi-line actions. Try to do the following:
:set ft=plumed
:setlocal foldmethod=syntax
Now look at what happened to all the multi-line statements in PLUMED (i.e. those using Continuation lines). As you can see, they will be folded into single lines. Folded lines can be expanded with zo and folded with zc. Look at VIM documentation to learn more. In case you want to use this feature, we suggest you to put both label and action type on the first line of multi-line statements. E.g.
m: METAD ... ARG=d HEIGHT=1.0 SIGMA=0.5 PACE=100 ...
will be folded to
+-- 6 lines: m: METAD ...------------------------------------------------------
and
METAD LABEL=m ... ARG=d HEIGHT=1.0 SIGMA=0.5 PACE=100 ...
will be folded to
+-- 6 lines: METAD LABEL=m ...-------------------------------------------------
This will allow you to easily identify the folded lines by seeing the most important information, that is the action type (METAD) and its label (m). This feature is convenient if you want to browse files that contain a lot of actions defined on multiple lines.
Another VIM feature that comes when you load PLUMED syntax is autocompletion of PLUMED actions and keywords. Open your favorite PLUMED input file and set it to PLUMED syntax highlighting with
:set ft=plumed
Now go into insert mode pressing i and type DU followed by <CTRL+X><CTRL+O>. Here <CTRL+X> stands for autocompletion and <CTRL+O> for omnifunc autocompletion. You will see a short menu listing the following actions
DUMPATOMS DUMPDERIVATIVES DUMPFORCES DUMPMASSCHARGE DUMPMULTICOLVAR DUMPPROJECTIONS
That is, all the actions starting with DU. You can navigate it with up and down arrows so as to choose the best match.
Notice that the default behavior of VIM is to use the first match by default. In the first example (DU<CTRL+X><CTRL+O), it would be DUMPATOMS. The following settings make it work as most of the people expect:
:set completeopt=longest,menuone
With these settings, in the first example (DU<CTRL+X><CTRL+O) VIM will only complete up to the longest common part (DUMP).
As you can imagine, if you use autocompletion after you have typed the word DISTANCE followed by a space you will see a menu listing LABEL=, COMPONENTS, etc. Basically, all the keywords that are possibly used within a DISTANCE line will be shown. This is very useful if you do not remember the exact name of the keywords associated with a given action.
You can also retrieve quick explanation of the input options for a specific action. Try to do the following. Enable plumed syntax:
:set ft=plumed
Then add the following line
DISTANCE
Now, in normal mode, go with the cursor on the DISTANCE line and type
:PHelp
A new split window should appear containing some documentation about the DISTANCE collective variable. You can go back and forth between the two windows with <CTRL+W><CTRL+W>, as usually in vim. Notice that if you are in the help window and type :PHelp this window will be closed.
To make the navigation easier, you can add a shortcut in your .vimrc file. For example, adding:
: nmap <F2> : PHelp<CR>
you should be able to open and close the manual hitting the F2 key. This is done automatically in the PLUMED syntax file if you add let plumed_shortcuts=1 to your vimrc file.
Most of the PLUMED output files look like this
#! FIELDS A B C 1 2 3
This is useful since in the header you can see the name of the quantities that are printed in the data lines. However, when you have an output file with many columns it might be a bit error prone to count them. To simplify this, when PLUMED syntax for VIM is configured properly VIM should be able to:
plumedf. If not, just type :set ft=plumedf.Notice that the syntax file for the output files (plumedf.vim) is not the same one that is used for the PLUMED input file (plumed.vim).
To make output files more readable, vim will show FIELDS and SET words in a different color, and data columns with alternating colors (e.g. dark/light/dark/light). The colors in the columns are consistent with those shown in the FIELD line. In the example above, 1, 2, and 3 will be of the same color as A, B, and C respectively. This should make it much easier to find which columns correspond to a given quantity.
It is also possible to highlight a specific field of the file. Typing
:5PCol
you will highlight the fifth field. Notice that in the FIELDS line (the first line of the file) the 7th word of the line will be highlighted, which is the one containing the name of the field. This allows for easy matching of values shown in the file and tags provided in the FIELDS line. The highlighted column can be moved back and forth using :PPlus and :PMinus. Adding a count to the command will move the highlighted column more. E.g. :2PPlus will move the column to the right twice.
If you have a long output file, it might be convenient to split it with :split so that one of the two windows will only show the header. The other window can be used to navigate the file.
To make the navigation easier, you can add a shortcut in your .vimrc file. For example, adding:
: map <F3> :PMinus<CR> : map <F4> :PPlus<CR>
you should be able to move the highlight column using F3 and F4 buttons. This is done automatically in the PLUMED syntax file if you add let plumed_shortcuts=1 to your vimrc file.
1.8.14